[molpro-user] Compiling molpro Solaris 9

[Martin Weise]

Hello Sascha

I tried it to compile with '-i8', but configure produces an error message (see
below):

./configure -f90 -i8 -f '' 
getmachine was unable to identify your operating system correctly.
NOTICE: Invoking /opt/SUNWspro/bin/f90 -f77 -ftrap=%none -o machine.exe
machine.f mctype.o
machine.f:
 MAIN machine:
	fehler:
	save_all_files:
gmake: Nothing to be done for `default'.
Setting up integer*8 version; if you want integer*4, use configure -i4
NOTICE: Invoking /opt/SUNWspro/bin/f90 -f77 -fast -ftrap=%none
-xtypemap=real:64,double:64,integer:64 -xarch=v9a -o machine.exe machine.f mctype.o
machine.f:
 MAIN machine:
	fehler:
	save_all_files:
ld: elf error: file /opt/SUNWspro/prod/lib/libfsu.a(__xargc.o): elf_getshdr:
Request error: class file/memory mismatch
ld: elf error: file /opt/SUNWspro/prod/lib/libfsu.a(__xargv.o): elf_getshdr:
Request error: class file/memory mismatch
ld: warning: file /opt/SUNWspro/prod/lib/libfsu.a(f90_init.o): wrong ELF class:
ELFCLASS32
ld: fatal: File processing errors. No output written to machine.exe
ln: cannot access ./machine.exe
gmake: *** [machine.exe] Error 2
gmake: Nothing to be done for `default'.
./configure: utilities/machine.exe: not found
If you believe the error is not your fault,
then email the molpro mailing list at molpro-user at molpro.net, specifying operating
system type and version, compiler type and version and any other
information which would be useful. Exiting ...


This is the output of uname an my compiler version:

'f90 -V' ==> f90: Sun Fortran 95 7.1 2003/03/12
'uname -a' ==> SunOS kopernikus 5.9 Generic_117171-12 sun4u sparc


When I tried to compile the mctype.c by hand, I realized that the '-f77' causes
the error, but I don't know where to change the flags, so that it compiles
correctly.

Regards
 Martin Weise

Quoting Alexander Mitrushenkov <sasha at theochem.uni-stuttgart.de>:

> Hello Matrin,
> 
> As you can see on molpro webpage, Solaris 9 is a supported architecture
> for molpro, provided the compiler is recent enough. It seems that you
> have UltraSparcIII architecture, is this correct? Why don't you compile
> 64-bit version of molpro (./configure -i8)? Can you specify your
> compiler version so we could look at the problem? It seems that your
> compiler does not like 'SIZE' intrinsic, which is required in molpro
> code.
> 
> Thanks,
> 
> Sasha
> -- 
> Dr. Alexander O. Mitrushchenkov
> 
> Universitaet Stuttgart
> Institut fuer Theoretische Chemie
> Pfaffenwaldring 55
> D-70569 Stuttgart
> Germany
> 
> Tel +49 (0)711 / 685-64409
> Fax +49 (0)711 / 685-64442
> e-mail: sasha at theochem.uni-stuttgart.de
> 
> 
> On Thu, 2006-08-03 at 11:45 +0200, Martin Weise wrote:
> > Hello 
> > 
> > I have a problem compiling molpro2006.1 on Solaris 9.
> > I use the Solaris f90 compiler, and configured molpro with
> > the following flags: -f90 -i4
> > 
> > I had to use the i4-flags, as I was not able to get it configured and
> > the compile to run.
> > 
> > Furthermore I had to add the following entry 
> > 
> >     NO_OPT="blas/lapack1.f basis/basis_contract.f"
> > 
> > to the CONFIG file, as I do not have 10GB of swap. (basis/basis_contract.f
> was
> > added)
> > 
> > So when compiling these settings I get the following error:
> > 
> > sapt.f90: preprocessing ... compiling ... failed:
> > f90 -dalign -c -I. -M../global -fast -ftrap=%none -xarch=v8plusb -fsimple=2
> sapt.f90
> > 
> >   use dmmult
> >       ^      
> > "sapt.f90", Line = 9, Column = 7: ERROR: No specific intrinsic exists for
> the
> > intrinsic call "SIZE".
> > 
> >   use dmmult
> >       ^      
> > "sapt.f90", Line = 75, Column = 7: ERROR: No specific intrinsic exists for
> the
> > intrinsic call "SIZE".
> > 
> >   use dmmult
> >       ^      
> > "sapt.f90", Line = 291, Column = 7: ERROR: No specific intrinsic exists for
> the
> > intrinsic call "SIZE".
> > 
> >   use dmmult
> >       ^      
> > "sapt.f90", Line = 480, Column = 7: ERROR: No specific intrinsic exists for
> the
> > intrinsic call "SIZE".
> > 
> >   use dmmult
> >       ^      
> > "sapt.f90", Line = 894, Column = 7: ERROR: No specific intrinsic exists for
> the
> > intrinsic call "SIZE".
> > 
> >   use dmmult
> >       ^      
> > "sapt.f90", Line = 986, Column = 7: ERROR: No specific intrinsic exists for
> the
> > intrinsic call "SIZE".
> > 
> > f90comp: 1292 SOURCE LINES
> > f90comp: 6 ERRORS, 0 WARNINGS, 0 OTHER MESSAGES, 0 ANSI
> > gmake[3]: *** [sapt.o] Error 1
> > sapt_driver.f90: preprocessing ... compiling ... done
> > utils_sapt.f90: preprocessing ... compiling ... done
> > gmake[3]: Leaving directory
> > `sources/molpro2006.1/molpro2006.1/src/sapt'
> > gmake[2]: *** [objects] Error 2
> > gmake[2]: Leaving directory
> > `sources/molpro2006.1/molpro2006.1/src/sapt'
> > gmake[1]: *** [sapt] Error 2
> > gmake[1]: Leaving directory
> > `sources/molpro2006.1/molpro2006.1/src'
> > gmake: *** [src] Error 2
> > 
> > 
> > Actually I have no idea what to do what that error message. Is something
> missing
> > or wrong? 
> > 
> > Regards
> >  Martin Weise
> > 
> > -------------------------------------------------
> > This mail sent through IMP: http://horde.org/imp/
> > 
> 
> 
> 




-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/