[molpro-user] Installation Molpro 2010.1.22

[Andy May]

Artur,

The error you see relates to downloading the license token from the 
Molpro website. It could perhaps be firewall related or wrong 
credentials, but it is not worth investigating. The easiest way to fix 
is to manually log in to the website and download the license token from 
the website and install it in INSTLIB/.token.

Best wishes,

Andy

On 29/06/11 09:49, Artur Ukleja wrote:
> Hi Andy,
>
> thanks a lot for fast answer. I will install new patch but here my
> problem was stupid. As first I should install Molpro2010.1 and the patch
> 2010.1.22 (or 23) just after. I did know about that and I tried to
> install patch 2010.1.22 without Molpro2010.1. I am sorry again but I was
> installing of Molpro for the first time and I did know about that.
>
> May I have now other question for you?
>
> I got strange info during installation process. One note is that :
> Installation of Molpro files complete" and just after new note that:
> "Error: Token downloaded unsucessful". Comment is as follows:
>
> [arturu at wn2079 molpro2010.1]$ make install
> make[1]: Entering directory `/vosoft/plgrid/molpro/molpro2010.1/utilities'
> make[1]: Nothing to be done for `default'.
> make[1]: Leaving directory `/vosoft/plgrid/molpro/molpro2010.1/utilities'
> ......
> make[1]: Leaving directory `/vosoft/plgrid/molpro/molpro2010.1/lib'
> make[1]: Entering directory `/vosoft/plgrid/molpro/molpro2010.1'
> building local-install.sh.gz
> make[1]: Leaving directory `/vosoft/plgrid/molpro/molpro2010.1'
> tar: molpros_2010_1_Linux_x86_64_i8.template: time stamp 2011-06-28
> 17:45:15 is 153 s in the future
> tar: molpros_2010_1_Linux_x86_64_i8.exe: time stamp 2011-06-28 17:45:15
> is 152 s in the future
>
> Installation of Molpro files complete
>
> Please give your username for accessing molpro
> xxxxx
>
> Please give your password for accessing molpro
> xxxxx
>
> Error: Token downloaded unsucessful
> make: *** [install] Error 1
> [arturu at wn2079 molpro2010.1]$
>
>
> Do you have idea what means? Is the Molpro2010.1 correctly installed or
> not? Should I be in stress due to note: "Error: Token downloaded
> unsucessful" or maybe should I ignored if note above says that
> "Installation of Molpro files complete"? I checked that the *.exe files
> were created in the proper directory.
>
> Once again thanks a lot. I appreciate your help very much.
> Cheers,
> Artur
>
>
> On 6/28/11 3:13 PM, Andy May wrote:
>> Artur,
>>
>> The problem has occured building MPICH2, you can hopefully see the
>> source of the problem in src/mpich2-1.3.3rc1/make.log.
>>
>> We are now on Molpro 2010.1.23, so I recommend to use this version of
>> Molpro (which now uses MPICH2 1.4).
>>
>> However, I believe the main source of the problem is likely to be
>> GCC/Gfortran 4.1.2. Unfortunately, Gfortran had many bugs in it's
>> early versions and could not successfully build Molpro (and probably
>> many other applications). I think you need at least GCC/Gfortran 4.3,
>> and if you are going to the trouble of installing another GCC/Gfortran
>> version I would recommend 4.5.
>>
>> Best wishes,
>>
>> Andy
>>
>> On 28/06/11 12:49, Artur Ukleja wrote:
>>> Dear Molpro team,
>>>
>>> I am trying to install Molpro 2010.1.22 on Scientific Linux CERN SLC
>>> release 5.6 (Boron) machine without success.
>>>
>>> The configuration stuck during "make" command (as I guess). I seems that
>>> compilation has started but failed just after called "make".
>>>
>>> I am using the following command to compile:
>>>
>>> [arturu at wn2079 Molpro]$ ./configure -batch -gcc -gfortran -mpp
>>> -auto-ga-tcgmsg-mpich2 -instroot /vosoft/plgrid/molpro/molpro2010.1.22
>>> -noblas -nolapack
>>>
>>>
>>> just after I got following result:
>>>
>>> [arturu at wn2079 Molpro]$ ./configure -batch -gcc -gfortran -mpp
>>> -auto-ga-tcgmsg-mpich2 -instroot /vosoft/plgrid/molpro/molpro2010.1.22
>>> -noblas -nolapack
>>>
>>> machine type recognized as x86_64 (Generic 64-bit)
>>> kernel recognized as Linux
>>>
>>> user request compiler gfortran
>>> GNU Fortran Compiler, Version 4.1.2
>>> FC=/usr/bin/gfortran
>>>
>>> user request compiler gcc
>>> GNU Compiler Collection, Version 4.1.2
>>> CC=/usr/bin/gcc
>>>
>>> starting auto-build of prerequisites
>>>
>>> % Total % Received % Xferd Average Speed Time Time Time Current
>>> Dload Upload Total Spent Left Speed
>>> 100 18.6M 100 18.6M 0 0 3584k 0 0:00:05 0:00:05 --:--:-- 4199k
>>>
>>> building MPICH2 version 1.3.3rc1, each step could take a few minutes
>>>
>>> ./configure --prefix=/vosoft/plgrid/molpro/Molpro/src/mpich2-install
>>> --with-device=ch3:nemesis --with-pm=hydra --enable-f77
>>> F77=/usr/bin/gfortran --enable-fc FC=/usr/bin/gfortran --enable-cc
>>> CC=/usr/bin/gcc --enable-cxx CXX=/usr/bin/g++
>>> make
>>> failed
>>>
>>> Result so far of configure written to CONFIG.errout
>>> [arturu at wn2079 Molpro]$
>>>
>>>
>>> I also attach CONFIG.errout file to this email. Does anybody have any
>>> idea how to fix it?
>>> Thank you in advance for any suggestions,
>>> Artur Ukleja
>>>
>>>
>>>
>>> _______________________________________________
>>> Molpro-user mailing list
>>> Molpro-user at molpro.net
>>> http://www.molpro.net/mailman/listinfo/molpro-user
>