[molpro-user] Molpro Installation Problem

[Andy May]

Saikat,

This is a problem with the compiler, you can avoid this by switching off
compiling this section of code by using the configure option '-noneci.

Best wishes,

Andy

On 10 February 2016 at 15:30, <pcsm2 at iacs.res.in> wrote:

>
> Dear Andy:
>
> Thanks for your advice. The configure goes well now.
> The next problem occurs with "make" command.
> It comes out with the following error:
>
>
> **************************************************************************************************
> $(FC) -c $(FFLAGS) $(F90FLAGS) -O3 fcimc_initialisation.F90
> $(FC) -c $(FFLAGS) $(F90FLAGS) -O3 fcimc_output.F90
> $(FC) -c $(FFLAGS) $(F90FLAGS) -O3 fcimc_iter_utilities.F90
> /tmp/ifortaZkltL.i90: catastrophic error: **Internal compiler error:
> segmentation violation signal raised** Please report this error along with
> the circumstances in which it occurred in a Software Problem Report.  Note:
> File and line given may not be explicit cause of this error.
> compilation aborted for fcimc_iter_utilities.F90 (code 1)
> make[3]: *** [fcimc_iter_utilities.o] Error 1
>
> ...
>
> make[3]: Target `targets' not remade because of errors.
> make[3]: Leaving directory `/export/home/iacs/Molpro/src/neci'
> make[2]: *** [default] Error 2
> make[2]: Leaving directory `/export/home/iacs/Molpro/src/neci'
> make[1]: *** [neci] Error 2
> make[1]: Leaving directory `/export/home/iacs/Molpro/src'
> make: *** [src] Error 2
>
>
> ************************************************************************************************************
>
> What can be done to make the installation success full. Please suggest.
>
> with regards,
> Saikat
>
>
> ----- Message from Andy May <ajmay81 at gmail.com> ---------
>    Date: Tue, 9 Feb 2016 17:43:16 +0000
>    From: Andy May <ajmay81 at gmail.com>
> Subject: Re: [molpro-user] Molpro Installation Problem
>      To: Saikat Mukherjee <pcsm2 at iacs.res.in>
>      Cc:
>
> Saikat, <molpro-user@%3Cspan%20index=>
>
> It could be this system kernel is too old for the latest parse objects,
> please download the patch level 0 tarball, then simply copy from there the
> file src/parse/parse-Linux-x86_64-i8.o to replace the one you have at the
> moment. <molpro-user@%3Cspan%20index=>
>   <molpro-user@%3Cspan%20index=>
> Best wishes, <molpro-user@%3Cspan%20index=>
>   <molpro-user@%3Cspan%20index=>
> Andy <molpro-user@%3Cspan%20index=>
>
> On 9 February 2016 at 14:23, < <molpro-user@%3Cspan%20index=>
> pcsm2 at iacs.res.in> wrote:
>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> *Dear Andy, As you suggested I tried to compile a fortran program
>> (fortran-test.f) with the printed options as:
>> "/export/intel/composerxe-2011.5.220/bin/intel64/ifort  -i8  -pc64
>>  -auto -vec-report0  -warn  nousage  -cxxlib  -O0  -lpthread
>> fortran-test.f" It compiled fine giving no error!! The program ran as well.
>> My fortran-test.f contains: "       implicit none         integer a
>> a=1         write(*,*)a         end" Please suggest further. May be the
>> problem comes due to the "parse" thing. I have no clue on this.    with
>> best regards,  Saikat ----- Message from Andy May <*
>> <molpro-user@%3Cspan%20index=>
>>
>>
>>
>>
>> *ajmay81 at gmail.com <ajmay81 at gmail.com>> ---------    Date: Tue, 9 Feb
>> 2016 12:18:21 +0000    From: Andy May <ajmay81 at gmail.com
>> <ajmay81 at gmail.com>> Subject: Re: [molpro-user] Molpro Installation Problem
>>      To: pcsm2 at iacs.res.in <pcsm2 at iacs.res.in>      Cc:*
>>
>> *Saikat, <molpro-user@%3Cspan%20index=>*
>> *  <molpro-user@%3Cspan%20index=>*
>> *The error message gives you a suggestion, can you try compiling a
>> trivial Fortran program using the printed options to see if it shows what
>> the problem is? <molpro-user@%3Cspan%20index=>*
>> *  <molpro-user@%3Cspan%20index=>*
>> *Best wishes, <molpro-user@%3Cspan%20index=>*
>> *  <molpro-user@%3Cspan%20index=>*
>> *Andy <molpro-user@%3Cspan%20index=>*
>>
>> *On 6 February 2016 at 10:58, <
>> <molpro-user@%3Cspan%20index=>pcsm2 at iacs.res.in <pcsm2 at iacs.res.in>> wrote:*
>>
>>>
>>>
>>> *Dear Molpro User and Developers:We are running molpro 2010 parallely in
>>> 4 node of IBM Blade.  <molpro-user@%3Cspan%20index=>*
>>>
>>> *overview of present cluster architecture defined below:
>>> <molpro-user@%3Cspan%20index=>*
>>> *total node: 4 <molpro-user@%3Cspan%20index=>*
>>> *OS: Rocks cluster 64 bit <molpro-user@%3Cspan%20index=>*
>>> *network type: tcp/ip <molpro-user@%3Cspan%20index=>*
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> *But while we are trying to install molpro 2012, it is showing
>>> error:/export/intel/composerxe-2011.5.220/bin/intel64/ifort  -i8  -pc64
>>>  -auto -vec-report0  -warn  nousage  -cxxlib  -O0  -lpthread"unable to link
>>> the perse object using:
>>> /export/intel/composerxe-2011.5.220/bin/intel64/ifort  -i8  -pc64  -auto
>>> -vec-report0  -warn  nousage  -cxxlib  -O0  -lpthread  /export/home/iacs/
>>> Molpro/src/boost-install/lib/libboost_system.a  /export/home/iacs/Molpro/
>>> src/boost-install/lib/libboost_thread.a  -lrt Please check the compiler is
>>> working, flags are correct and all libraries are present failed to
>>> determine PARSE Result so far of configure written to CONFIG.errout" Also
>>> the CONFIG.errout file has been attached below.
>>> <molpro-user@%3Cspan%20index=>*
>>>
>>>
>>>
>>>
>>>
>>>
>>> *Please help us to resolve this issue at your earliest. Thanks in
>>> advance Saikat Mukherjee Senior Research Fellow Indian Association for the
>>> Cultivation of Science, India <molpro-user@%3Cspan%20index=>*
>>>
>>>
>>>
>>> *_______________________________________________ Molpro-user mailing
>>> list <molpro-user@%3Cspan%20index=>Molpro-user at molpro.net
>>> <Molpro-user at molpro.net>*
>>
>>
>>
>>
>> *----- End message from Andy May <
>> <molpro-user@%3Cspan%20index=>ajmay81 at gmail.com <ajmay81 at gmail.com>> -----*
>>
>>
>
>
>
> *----- End message from Andy May <* <molpro-user@%3Cspan%20index=>*ajmay81 at gmail.com
> <ajmay81 at gmail.com>> -----*
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.molpro.net/pipermail/molpro-user/attachments/20160211/27052af8/attachment.html>